BSNYZ - Z-C, 892 CHROMATE PRIMER
- MSDS: BSNYZ
- Manufacturer: ACME AUTOMOTIVE FINISHES
- Product Name: Z-C, 892 CHROMATE PRIMER
- National Stock Number: 8010-00F031725
Product Identification
Product ID:Z-C, 892 CHROMATE PRIMER
MSDS Date:04/01/1991
FSC:8010
NIIN:00F031725
MSDS Number: BSNYZ
Responsible Party
CLEVELAND, OH 44115
US
Emergency Phone: 216-566-2917
Info Phone: 216-566-2902
Cage: ACMEA
Contractor
Telephone: 216-566-2917
Cage: ACMEA
Ingredients
KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 30-31%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 10-15%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYL BENZENE
CAS: 100-41-4
RTECS: DA0700000
Fraction By Weight: 2%
OSHA PEL 435 MG/CUM
ACGIH TLV: 434 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 39%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 5%
OSHA PEL 2 MG/CUM
ACGIH TLV: 2 MG/CUM (RESP DUST)
POTASSIUM ZINC CHROMATE (SUSPECTED HUMAN CARCINOGEN BY
CAS: 11103-86-9
RTECS: GA9170000
Fraction By Weight: 26%
ACGIH TLV: 0.05 MG/CUM
10.01
RTECS: 9999999WG
4.59 LBS/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:IRRITATION OF EYES/SKIN/RESPIRATORY
SYSTEM. CNS DEPRESSION. PROLONGED SOLVENT MAY CAUSE ADVERSE EFFECTS
TO LIVER/URINARY/REPRODUCTIVE. PERMANENT BRAIN & CNS DAMAGE.
EXTREME OVEREXPOSURE MAY CAUSE UNCO NSCIOUSNESS & POSSIBLY DEATH.
ALCOHOLS & ACETATES CAN BE ABSORBED THROUGH THE SKIN.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION:
HEADACHE/DIZZINESS/NAUSEA/COORDINATION LOSS/UNCONSCIOUSNESS/DEATH.
SKIN/EYES: REDNESS/ITCH/BURNING SENSATION. SYMPTOMS MAY NOT BE
IMMEDIATELY APPARENT.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF PROBLEMS REMAIN OR OCCUR
DURING USE, IMMEDIATELY GET MEDICAL ATTENTION. SKIN: WASH W/SOAP &
WATER. REMOVE CONTAMINATED CLOTHING. EYES: FLUSH W/PLENTY OF WATER
FOR 1 5 MINUTES. INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:75F
Lower Limits:0.7%
Upper Limits:12.7%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING SCBA.
WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE.
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP, POSSIBLE AUTOIGNITION, OR
EXPLOSION WHEN EXPOSED TO EXTREME HEAT. FLAMMABLE.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA.
REMVOE W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:USE ONLY IN ADEQUATE VENTILATION. KEEP
AWAY FROM HEAT, SPARKS, OPEN FLAME. DURING USE & UNTIL ALL VAPORS
ARE GONE; KEEP ARE VENTILATED. DON'T SMOKE.
Other Precautions:EXTINGUISH ALL FLAMES, PILOT LIGHTS & HEATERS. TURN
OFF STOVES/ELECTRIC TOOLS/APPLIANCES & OTHER IGNITION SOURCES.
CONSULT NFPA CODE. USE APPROVED BONDING/GROUNDING PROCEDURES. KEEP
CONTAINER CLOSED W HEN NOT IN USE. DON'T TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
TLV BY VENTILATION, USE A FITTED ORGANIC VAPOR/PARTICULATE
RESPIRATOR APPROVED BY NIOSH/MSHA. WHEN SANDING/ABRADING DRIED
FILM, USE A NIOSH/MSHA DUST/MI ST RESPIRATOR.
Ventilation:LOCAL EXHAUST: PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF
EXPOSURE TO MATERIALS IS MAINTAINED BELOW APPLICABLE LIMITS.
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:WASH HANDS AFTER USING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
TRANSFER ONLY TO APPROVED CONTAINERS W/COMPLETE LABELING. KEEP OUF OF
REACH OF CHILDREN. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING
& INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. MAY CONTAIN M
ATERIAL CLASSIFIED AS NUISANCE PARTICULATES WHICH MAY BE PRESENT AT
HAAZARDOUS LEVELS ONLY DURING ABRADING/SANDING FILM.
Chemical Properties
Boiling Pt:B.P. Text:178-425F
Vapor Density:>1
Spec Gravity:0.82-1.5
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:55-92
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT/SPARKS/OPEN FLAMES/PILOT LIGHTS &
OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CO2, CO & OXIDES OF METALS IN THE
INGREDIENTS SECTION.
Disposal
Waste Disposal Methods:PRODUCT WASTE MAY BE HAZARDOUS AS DEFINED UNDER
THE RCRA. TEST WASTE FOR IGNITABILITY TO DETERMINE THE APPLICABLE
EPA HAZARDOUS WASTE NUMBERS. INCINERATE IN APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINER. DISPOSE OF IAW FED/STATE/LOCAL REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.